Shark MATRIX 2300S Series - User Manual

QUICK START GUIDE
2300S/2300AE Series
Robot Setup:
2
Attach Side Brush
• Note: Side brush design may vary.
1
Set up Self-Empty Base
• Remove any plastic wrap and foam from the
robot and base.
• Place base in a location with a strong Wi-Fi signal.
• Dock LED will turn green when powered ON
• Note: Check between the bumper and wheels
to ensure all protective materials are removed
prior to robot use.
Side Brush
Turn Page
5 ft.
3 ft.
3 ft.
4
Scan QR code to download the
SharkClean® app to complete
robot setup.
App Features
✔ Mapping
✔ Scheduling
✔ No-Go Zones
SELF-EMPTY ROBOT
ROBOT
3
Place Robot on Self-Empty Base
• Robot will turn on when properly
placed on the dock.
• Dock LED will turn blue when the
robot is charging.
™

Shark MATRIX 2300S Series Specifications

General

Brand	Shark
Model	MATRIX 2300S Series
Category	Vacuum Cleaner
Language	English

Summary

Robot Setup Guide

Set Up Self-Empty Base

Instructions for setting up the self-empty base, including removing packaging, placement, and LED indicators.

Attach Side Brush

Instructions for attaching the side brush, noting potential design variations.

Place Robot on Self-Empty Base

Guidance on placing the robot on the dock, including power-on and charging indicators.

App Integration for Robot Setup

Scan QR code to download the SharkClean app for robot setup and access features like mapping and scheduling.