QUICK START GUIDE
2300 Series
Robot Setup:
4
Scan the QR code to download the SharkClean® app.
2
Attach Side Brush
• Note: Side brush design may vary.
1
Set Up Dock
• Remove any plastic wrap and foam from the
robot and base.
• Place dock in a spot with a strong Wi-Fi signal.
• Dock LED will turn green when powered ON.
• Note: Check between the bumper and wheels to
ensure all protective materials are removed prior
to robot use.
3
Place Robot on Dock
• Robot will turn on when properly placed on dock.
• Dock LED will turn blue when the robot is charging.
Side Brush
App Features
✔ Matrix Cleaning
✔ Mapping
✔ Scheduling
✔ No-Go Zones
• Complete your robot setup process in the app.
Turn Page
™
To Next Page
Need help?
General
