12 TOLL FREE: 1-800-798-7398
Maintenance
Resetting the Motor Thermostat
Your Shark
®
Navigator
™
Upright
Vacuum is equipped with a
protective Motor Thermostat. If
the motor should overheat, the
thermostat shuts off the power.
To reset the Motor Thermostat:
Move the Power Button to the
“O” – Off position.
Unplug the vacuum.
Check for clogged hose or filter;
unclog hose and replace filter. Refer
to Checking for Blockages on
page 11.
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Turn the Power Switch to the
“I” – On position to start the
vacuum.
NOTE: If vacuum still does not start,
contact Customer Service at:
1-800-798-7398.
Ordering Replacement Parts
To order additional parts and
accessories, go to
www.sharkclean.com
or call 1-800-798-7398.
PART PART NO.
Super Stretch Hose 1114-FC
Dusting Brush &
Crevice Tool 1115-FC
Foam & Felt Filters XFF36
Pet Upholstery Tool 261FFJ46
Cleaning Wand 1116-FC
To Next Page
Loading...
