5www.sharkclean.com
IMPORTANT:
For suction to reach the Floor
Power Nozzle, the Cleaning
Wand and Super Stretch Hose
must be attached securely on
the vacuum body.
10 To carry the vacuum:
With the unit in the standing
position, lift by the Dust Cup
Handle.
CAUTION: When lifting or
carrying, DO NOT press Dust
Cup Assembly release button.
8 Attach the Super Stretch Hose:
a) Snap hose into swivel
connector
b) Route under anti-tip hook
c) Route over upper hose
holder
d) Press securely onto cleaning
wand
IMPORTANT:
To prevent vacuum from
tipping, secure hose
under the anti-tip
hose hook.
9 To store the vacuum:
When storing your vacuum,
wind the cord around the two
cord holders and secure with
cord clip:
• Quick Cord release at the
top of the unit – place in the
upright position.
• Cord holder near the base
– turn it until it is pointing
down.
To release the cord, turn the
Quick Cord release to the left or
right.
8
a
C
b
d
9
To Next Page
Loading...
Need help?
General
