4
TOLL FREE: 1-800-798-7398
Along with your upright unit, you
will find the following components:
a Vacuum Body
b Floor Power Nozzle
c Handle Assembly
d Super Stretch Hose
e Cleaning Wand
f Pet Hair Power Brush
g Cleaning Attachments
h 24” Crevice Tool
i Hard Surface Brush
Getting Started
a c
e
4
5
3
7
2
g
h
i
b
f
d
Your Shark
®
Navigator
™
Upright is easy to assemble:
1 Lay your vacuum body on a
level surface.
2 Slide the electrical connection
from the power nozzle into the
main body to click into place.
3 Connect the hose from the main
body to the power nozzle; push
with a slight turning motion to
create a snug fit.
4 Slide the handle assembly
into the upright unit aligning
the hose hook on the handle
assembly with the power cord
hooks on the back of the unit.
5 Secure the handle assembly in
place with included nut/bolt
(shipped attached to handle
assembly).
6 Place the vacuum in the upright
position.
7 Store the Crevice Tool, Dusting
Brush and Cleaning Wand on
the unit.
UV400_26_IB_ENG_SPA_110111.indd 4 11-01-11 1:45 PM
To Next Page
Loading...
