Shark ROTATOR NV95 Series - Cleaning Vacuum Filters

16
sharkclean.com
3 Press top dust-cup release
latch to access and clean
dust screen asrequired.
CLEANING THE FILTERS
1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out and
rinse the foam and felt
filters with water. Tap
loose dirt off filters
between washes
asneeded.
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill and
press the button and pull
the grill away from the
vacuum. Remove and
rinse the HEPA filter.
STEP 3
HEPA
FELT FILTER
FOAM FILTER