2 Press the On/Off switch to the “I” position
to vacuum bare floors or cleaning with the
hose (straight suction only). The brushroll
will not spin.
3 Press the ON/Off switch to the “II” position
to engage the motorized floor brush (for
vacuuming carpets and rugs). The brushroll
indicator lights will illuminate GREEN. If
there is a jam, the indicator light on the
floor nozzle will illuminate RED. Refer to
maintenance (page 17) for instructions on
removing blockages.
STEP 2
POWER POWER + BRUSHROLL
STEP 3
To Next Page
Loading...
