Shark S3502 - Pocket Mop; Using Your Carpet Glider; Care of Your Steam Pocket Mop

8
TOLL FREE: 1-800-798-7398
9
www.sharkclean.com
English
Care of Your Steam Pocket
®
Mop
2 Remove the micro-fiber Steam
Pocket® Steam Pocket
®
by releasing
the quick fasteners and using the
lavender loop on the side of the
pocket, avoiding contact with the hot
pocket or dirt. Then empty the water
tank.
IMPORTANT: Be very careful
because the Steam Pockets
®
can
get very hot from the steam, so use
caution when removing them. Let the
unit cool 2-3 minutes.
3 To store the Shark
®
Steam Pocket
®
Mop hanging up; first remove the
head (after it has cooled and the
steam has been released) then hang
on a large hook.
NOTE: If you want to store it
standing upright then make sure
it’s leaning against a wall for added
support and safety. Always store
your Steam Pocket
®
Mop with
the micro-fiber Steam Pockets
®
removed, away from children or
high traffic areas.
AFTER USE AND STORAGE
1 When you have finished using
the Steam Pocket
®
Mop, and your
floors are clean, unplug the cord
from the outlet and move it into an
upright position. Let the unit cool
2-3 minutes and release steam by
pumping the handle several times
before removing the micro-fiber
Steam Pocket
®
from the mop head.
1
2
3
Using Your Carpet Glider
THE CARPET GLIDER
1 The Carpet Glider can be used to
lightly steam your carpet and area
rugs. Just place the mop head on
top of the glider and move back and
forth across a section of the carpet.
The Steam Pocket
®
Mop won’t clean
your carpeting or areas rugs, but it’s
great for deodorizing and freshening.
NOTE: Please note that the Steam
Pocket
®
Mop rests on top of the
carpet glider and it is not a fixed
attachment.
Do not leave Steam Pocket
®
Mop
with carpet glider in one stationary
position for any period of time.
1
The Steam Pocket
®
Mop won’t
clean your carpeting or area
rugs. However, it’s great for
deodorizing and freshening.