sharkclean.comsharkclean.com
FILLING THE RESERVOIR
CLEANING MODES
Lift the reservoir lid and press it up until it clicks into the open locked position. Carefully pour Shark Cleaner
into the reservoir, up to the MAX line. When finished, press the lid closed.
For best results, first use the vacuum to remove debris, then spray the Shark Cleaner to wet mop.
OPEN RESERVOIR LID
VACUUM
FILL WITH SHARK® CLEANER
WET MOP
STORAGE
After wet cleaning, remove the pad from the VACMOP™ base before storing the unit.
To store the unit, stand it upright and lean the back of the non-slip handle against a wall.
To hang the unit from a nail or wall hook (not included) align the opening at the end of the handle over the
hook or nail.
LEAN AGAINST WALL HANG FROM HOOK
NOTE: Before using your unit for the first time, carefully add the entire starter bottle of Shark Cleaner into the reservoir.
To Next Page
Loading...
