Shark VACMOP - Troubleshooting Guide; Suction Issues; Power and Sprayer Problems; Floor Streaking

sharkclean.comsharkclean.com
ADDITIONAL ACCESSORIES AVAILABLE ON SHARKCLEAN.COM/VACMOPMAINTAINING YOUR VACUUM
A B
C
A
VACMOP™ Disposable Pads
B
VACMOP Cleaner
C
Standard Replacement Charger
TROUBLESHOOTING WHAT’S INCLUDEDTROUBLESHOOTING
VACMOP™ is not picking up debris. No suction or light suction.
• VACMOP Disposable Pad may not be securely attached. Reattach the pad.
• VACMOP Disposable Pad may be full of debris and need to be replaced.
• Battery charge may be low. Recharge the battery completely.
The unit turns o on its own. Sprayer is not spraying.
• Battery charge may be low. Recharge the battery completely.
Streaks appear on floor after wet mopping.
• VACMOP Multi-Surface Cleaner is designed to deliver a streak-free finish when used with the
Shark VACMOP. Using other cleaner may result in streaking and residue.
FREQUENTLY ASKED QUESTIONS
When should I replace my VACMOP Disposable Pad?
• Replace the pad when it becomes fully saturated, its dust bin is full, it is noticeably dirty,
or if the VACMOP is showing signs of reduced suction power.
Where can I use my VACMOP?
• VACMOP can safely be used on all sealed hard floors—stone, hardwood, vinyl, laminate, tile, marble,
and linoleum.
NOTE: Not all accessories come with all units. For a list of the accessories included with this model, see the top inside
flap of the box. To order additional accessories, visit sharkaccessories.com.