Sharkoon FireGlider - 5. Connecting to a PC; 6. Installing the software

RUSH FIREGLIDER/FIREGLIDER BLACK
ENGLISH
5. Connecting to a PC
1. Plug the mouse’s USB connector to an available USB
connector of your PC.
2. The operating system will automatically recognize the mouse
and install all needed drivers.
3. If your mouse is not recognized, disconnect it and try
 anotherofyourPC’sUSBconnectors.
6. Installing the software
1. Before installing the included software, remove all other
installed mouse software from your system.
2. PuttheincludedToolsCDintoyourCD/DVDdrive.
3. OpentheCD/DVDdrive’sfolder(e.g.D:).
4. Choose the directory “MouseGeneral…” and start
 “setup.exe”(g.1).
5. TheInstallShieldWizardwillbelaunched(g.1).
fig. 1
 Continuebyclicking“Next”orpress“Cancel”toabortthe
installation.