32U-S600
32U-S710
5
LOCATION OF USER'S CONTROL
(32U-S710)
Front Panel
POWER
Press On.
Press again Off.
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote
control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Control Functions
CHANNEL UP/DOWN
(
|
|
|
|
) Selects next higher
channel.
( ) Selects next lower
channel.
• Press both at the same
time to access the MAIN
MENU screen.
SENSOR AREA FOR
REMOTE CONTROL
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
IN 2
VIDEO L-AUDIO-R
(INSIDE DOOR)
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
VCR-CH
FLASHBACK
POWER (DVD/VCR)
PIP SELECT
SWAP
CH SKIP
FREEZE MOVE
REC
PLAY
L
STOP
FWDREW
PAUSE
ANT–A/B
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
CH
VOL
–
VOL
+
CH
MENU MUTE SKIP
POWER
Press On.
Press again Off.
POWER (DVD/VCR)
Press On.
Press again Off.
ANT–A/B
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite programs
by using the 4 categories A, B, C and D
The channels can be accessed quickly
by using these buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
•
In menu mode, changes or selects the
TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
MUTE
Press Mutes sound.
Press again Restores sound.
•
CLOSED CAPTION appears when
sound is muted.
PIP FUNCTION
You can watch two pictures at the same
time.
DVD/VCR CONTROL
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR, sends power and channel
select commands (Channel up/down and
Random Access buttons) to the TV and
VCR control.
Press CATV/DVD, sends power and
channel select commands to a cable TV
converter and DVD control.
DISPLAY
Press Displays receiving channel for
four seconds.
Press again Removes display.
•
Temporarily displays receiving channel
when in Closed Caption mode.
INPUT
Press Switch to external video INPUT
1 mode.
Press 2 times Switch to external video
INPUT 2 mode.
Press 3 times Switch to external video
INPUT 3 mode or COMPONENT mode.
Press 4 times Switch back to the
original TV mode.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels, when
using the REMOTE KEYPAD button.
CHANNEL UP/DOWN
( ) Selects next higher channel.
( ) Selects next lower channel.
SKIP/VCR-CH
REC
→
→
→
→
→
→
→
→
→
→
→
→
→
→
→
→
→
→
•
Moves the “
” mark of the MENU
screens.
»
To Next Page
Loading...
Need help?
General
