19
AH-S22DP2
AH-S25DP2
AH-S32DP2
• The remote control displays " ".
• The red OPERATION lamp (
) and the blue
PLASMACLUSTER lamp on the unit will light up.
• The unit will stop operation after forty minutes.
• The remaining operation time will be indicated on
the TEMPERATURE INDICATOR of the indoor
unit in minute decrements.
TO CANCEL
Press the SELF CLEAN button.
Or, turn the unit off by pressing the ON/OFF button.
• The red OPERATION lamp (
),the blue
PLASMACLUSTER lamp and the TEMPERATURE
INDICATOR on the unit will turn off.
1
During operation, press the PLASMACLUSTER
button to select the mode.
You can choose PLASMA CLUSTER AUTO OPERATION, AIR CLEAN OPERATION or
REFRESHING OPERATION
PLASMACLUSTER AUTO AIR CLEAN REFRESHING CANCEL
• In the AIR CLEAN operation, the blue
PLASMACLUSTER lamp on the unit will light up.
• In the REFRESHING operation, the green
PLASMACLUSTER lamp on the unit will light up.
TO CANCEL
Press the PLASMACLUSTER button until
PLASMACLUSTER symbol on the remote control
display goes off.
• The PLASMACLUSTER lamp on the unit will turn
off.
NOTE:
• You cannot set the temperature, fan speed, air flow direction or timer setting during the
SELF CLEAN operation.
NOTES:
• Setting of the PLASMACLUSTER operation will be memorized and will operate in the
same mode, the next time you turn on the air conditioner.
• To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
PLASMA CLUSTER OPERATION
SELF CLEAN OPERATION
Press the SELF CLEAN button when the unit is not
operating.
1
1
1
1h
To Next Page
Loading...
Need help?
General
