Sharp AH-XP10 B Series - Page 16

EN-15EN-15
BEFORE CALLING FOR SERVICE
3
Press the FAN button once, the remote
control will display “ ”.
4
Press the THERMOSTAT button “ ”
or “ ”, remote control display will
change from “ ” to “ ” step by step.
Meanwhile, buzzer makes a short beep
sound on every step.
•When it displays “  ”, the buzzer will
make a long beep sound to remind you
this error code “ ”issuberrorcode.
ABOUT ERROR CODE
•Theerrorcodecontainsmaincodeandsub
code.
Example
: error 23-4.
ERRORCODE
Main
Code
Sub
Code
GET THE ERROR CODE
Example
: error 23-4.
1
Press the THERMOSTAT button “ ”
for over 5 seconds on remote control
when the indoor unit and remote control
is off.
•The remote control will display“ ” and
therewillbeabeepsoundfromtheunit’s
buzzer.
2
Press the THERMOSTAT button “ ”
or “ ”, remote control display will
change from “ ” to “ ” step by step.
Meanwhile, buzzer makes a short beep
sound on every step.
•When it displays “  ”, the buzzer will
make a long beep sound to remind you
this error code “ ” is main error code.
1
4
2
3