Sharp AL-2030

14
Follow the steps below to load paper into the tray.
PAPER
For best results, use only paper recommended by SHARP.
*1 Do not use non-standard envelopes, and envelopes that have metal clasps,
plastic snappers, string closures, windows, linings, self-adhesive, patches or
synthetic materials. Do not use envelopes that are filled with air or envelopes that
have labels or stamps attached. These will cause physical damage to the unit.
*2 For paper weighing from 28 lbs. to 34.5 lbs. (105g/m
2
to 128g/m
2
), 8-1/2" x 11" is
the maximum size that can be fed through the multi-bypass tray.
• Special papers such as transparency film, labels and envelopes must be fed one
sheet at a time through the multi-bypass tray.
Type of paper
feeding
Type of media Size Weight
Paper tray Standard paper Letter (8-1/2" x 11")
Legal (8-1/2" x 14")
Invoice (5-1/2" x 8-1/2")
15 lbs. to 21 lbs.
(56g/m
2
to
80g/m
2
)
Multi-bypass
tray
Standard paper and
thick paper
Letter (8-1/2" x 11")
Legal (8-1/2" x 14")
Invoice (5-1/2" x 8-1/2")
14 lbs. to 34.5
lbs.*
2
(52g/m
2
to
128g/m
2
)
Special
media
Transparency
film
Letter (8-1/2" x 11")
Envelope*
1
Commercial 10
(4-1/8" x 9-1/2")
Monarch
(3-7/8" x 7-1/2")
3
LOADING PAPER
AL-2030_2040CS.book 14 ページ ２００７年４月６日 金曜日 午前１１時３２分