Sharp Aquos LC-13E1M - Selecting the Menu Items; Selecting a Menu Item

14
CH
VOL
LANGUAGE DIS.MODE
DISPLAY
BRIGHTSLEEP
MENU
POWER
MPX
-/--
TV
VIDEO
MENU
]/[
</>
MENU
MENU
SLEEP TIMER
PICTURE
FEATURE
CH-SETTING
SELECT: ENTER:
EXIT:
SELECTING THE MENU ITEMS
• This LCD TV set allows you to adjust the picture and sound, and set the channels and other features
using the On-Screen Display. Select the desired menu item by following the steps below and then refer
to the indicated page for details.
SLEEP TIMER
menu ----------------- Page 19
PICTURE menu
(TV mode) ---------- Page 20
FEATURE menu --- Page 22
CH-SETTING
menu ---------------- Page 18
1 Press MENU to display the MENU
screen.
2 Press ]/[ to select the desired
menu item.
• The “ ” mark moves up or down.
• The “ ” mark indicates the selected
menu item.
3 Press </> to enter.
• The TINT display only appears when
the COLOUR SYSTEM sets N358 or
N443 in the NTSC mode.
• The displayed items differ depending
on the setting conditions.
• The selected item changes to yellow.
• Items in purple cannot be selected.
(AV mode) --------- Page 20
Selecting a Menu Item
Note:
* The screen indications shown above are larger than actual for easy reading.
MENU
SELECT:
ADJUST:
EXIT:
CH-SETTING
RETURN
POSITION [CH15 ]
COLOUR SYSTEM [AUTO ]
SOUND SYSTEM [B/G ]
SKIP [OFF ]
FINE [783.25MHz]
NICAM [ON ]
IGR [ON ]
PICTURE (TV)
RETURN
CONTRAST [ 30 ]
COLOUR [ 0 ]
BLACK LEVEL [ 0 ]
SHARPNESS [ 0 ]
RED-BLUE [ 0 ]
GREEN [ 0 ]
RESET
MENU
SELECT: ENTER:
EXIT:
0
0
0
0
0
0
PICTURE (AV1/AV2/COMPONENT)
RETURN
CONTRAST [ 30 ]
COLOUR SYSTEM [AUTO]
COLOUR [ 0 ]
BLACK LEVEL [ 0 ]
SHARPNESS [ 0 ]
RED-BLUE [ 0 ]
GREEN [ 0 ]
RESET
MENU
SELECT: ENTER:
EXIT:
TINT [ 0 ]
0
0
0
0
0
0
0
FEATURE
RETURN
BRIGHTNESS [BRIGHT ]
AUTO POWER OFF [OFF ]
DISPLAY MODE [NORMAL ]
AV2 IN/OUT [IN ]
BLUE BACK [ON ]
LANGUAGE [ENGLISH]
MENU
SELECT:
ADJUST:
EXIT:
SLEEP TIMER
RETURN
SLEEP TIMER [---REMAIN]
MENU
SELECT:
ADJUST:
EXIT: