Sharp Aquos LC-32A33X - Selecting a Preset AV MODE

Press AV MODE.
• Present AV MODE displays.
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
1
2
32
Watching TV
Selecting a preset AV MODE
The AV MODE function enables you to select
appropriate settings for audio and video to account for
the system environment which can vary due to factors
like room brightness, type of programme watched or
the type of image input from external equipment.
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• During PC input mode, only “STANDARD”, “PC” and
“USER” can be selected under the AV mode selection.
Selected item Description
STANDARD For a highly defi ned image in a normally
bright room
MOVIE For a movie
GAME Lowers image brightness for easier
viewing.
PC For PC. (Available only when inputting an
HDMI or PC signal.)
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC
(FIXED)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
Using AV MODE on the remote control unit
AV Mode : STANDARD
AV Mode : DYNAMIC
AV Mode : MOVIE
AV Mode : DYNAMIC (FIXED)
AV Mode : USER (TV)
AV Mode : GAME
AV Mode : PC
AV input mode
AV Mode : STANDARD
AV Mode : PC
AV Mode : USER ( )
PC input mode
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Picture”.
2
Press
a
/
b
to select “AV Mode”, and then
press ENTER.
3
Press
a
/
b
to select the desired item, and
then press ENTER.
4
Using AV Mode on the menu screen
32A33X_en_e.indd 3232A33X_en_e.indd 32 2008-1-4 20:15:182008-1-4 20:15:18