Appendix
-
29
ENGLISH
Environmental specifications
Item
*1 On-Mode (W) 38W
*2 Standby-Mode (W) 0.15W
*3 Annual Energy Consumption (kWh) 55kWh
*1 Measured according to EN62087 : 2009.
*2 Measured according to EN62301 : 2005.
*3 Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4
hours a day, 365 days a year.
NOTE
• The power consumption of On-Mode varies depending on the images the TV displays.
Other information
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
• Storage temperature: -20°C to +60°C.
Devices connected to the protective earthing of the building installation through the MAINS connection or through
other devices with a connection to protective earthing and to a television distribution system using coaxial cable,
may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be
provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN
60728-11).
NOTE
• For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be
connected to television distribution systems.
SHARP_LE144E_1_GB_English.indd 29SHARP_LE144E_1_GB_English.indd 29 5/31/2012 2:56:12 PM5/31/2012 2:56:12 PM
To Next Page
Loading...
