9
Preparation
INPUT 4 terminals
INPUT 1 (HDMI)
terminals**
AC INPUT
terminal
INPUT 7 (PC)
terminals**
INPUT 2 (HDMI) terminal
MONITOR OUT terminals
Antenna input
terminal
Headphone jack
RS-232C terminal
INPUT 3 (HDMI)
terminal
DIGITAL AUDIO OUTPUT terminal
SERVICE ONLY
terminal*
INPUT 5
terminals
INPUT 6 terminals
TV (Rear)
*2
*1
*3
*1
PD446WJ
NOTE
*1 See pages 14 and 15 for external equipment connection.
*2 The Disc Drive has an ETHERNET terminal.
You will be able to enjoy additional contents by downloading them via the Internet.
(For the BD-VIDEO discs compatible with BD-LIVE.)
*3 See page 11 for connecting the AC cord.
* Usually do not connect anything to this terminal as it is reserved only for service personnel.
** The INPUT 1 and INPUT 7 terminals can both use the same audio input terminal. However, the proper item must be selected
in the “PC audio select” menu. (See page 78.)
Regarding the headphone jack
• Use headphones with a stereo mini plug (
Ǿ
3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
• You can set the volume to different levels for each input source.
Volume display when headphones are plugged in
20
LC-40LB700X_en_b.indd 9LC-40LB700X_en_b.indd 9 8/7/2009 12:35:45 PM8/7/2009 12:35:45 PM
To Next Page
Loading...
