Sharp Aquos LC-40LB700X

62
Disc Playback
Partial Repeat Playback (Repeat Playback
of a Specifi ed Part)
DVD-VIDEO
DVD-R
DVD-RW
AUDIO CD
NOTE
• Some operations in the following playback function cannot
be performed depending on the specifi cations of the disc.
1
Press DISC MENU during playback.
• The DISC MENU control screen is displayed.
2
Press
a
/
b
to select “ ”, and then press
ENTER.
3
Press
a
/
b
to select “On”, and then press
ENTER.
4
Press
c
/
d
to select “Scene Selection”, and
then press ENTER.
• “Set Start Point” displays.
Playback Chapter Playback Title
Scene Selection
Set Start Point
5
Press ENTER at the scene where you want to
set the start point.
• “Set Start Point” displays.
6
Press ENTER at the scene where you want to
set the end point.
• You can press
J
to fast forward to the scene
where you want to set the end point. When you
reach the desired scene, simply press
d
and then
ENTER to set the end point.
To cancel Repeat Playback
1
Press
a
/
b
to select “ ” while the DISC
MENU control screen is displayed.
2
Press
c
/
d
to select “Off”, and then press
ENTER.
NOTE
• Press
U
, the Repeat Playback is cancelled and the next
chapter is played back.
• Press
T
once, the Repeat Playback is cancelled and the
TV returns to the start of current chapter (track).
• If you press
T
again (within about 5 seconds), the TV will
skip to the beginning of the previous chapter (track).
• For Partial Repeat Playback, set the start and end points
within the same title.
• Repeat Playback may be forbidden depending on the disc.
• Partial Repeat Playback may not work in multi-angle
scenes.
• If you press DISPLAY, you can confi rm the Repeat
Playback status.
Displaying the Audio Information
Pressing MPX displays the audio information for the
disc being played back.
• The displayed information varies depending on the disc.
BD-VIDEO
DVD-VIDEO
The audio track currently being played back will be
displayed.
• If multiple audio is recorded, you can switch the audio each
time you press MPX.
DVD-RW
DVD-R
When a recorded broadcast with stereo or
monaural audio is played back:
“Stereo” is displayed. (Audio cannot be switched.)
LC-40LB700X_en_g.indd 62LC-40LB700X_en_g.indd 62 8/7/2009 12:37:53 PM8/7/2009 12:37:53 PM