Basic adjustment settings
You can run
EZ
Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Press
MENU
to
display the MENU screen,
and then press
.....
/~
to select "Setup".
Press
Ja/T to select "EZ Setup", and then
press
ENTER.
•
If
you already set the Secret No., go to step
3.
If
not, skip to step
4.
Input the 4-digit secret number by using
0-9.
Press
Ja./T
to select the desired language
listed on the screen, and then press
ENTER.
Antenna setting
Make sure what kind of connection
is
made with your
TV when selecting "Air" or "Cable".
Press
.....
/~
to select "Air" or "Cable".
Press
ENTER to enter the setting.
Channel search
Channel auto search makes the TV look for
all
channels
viewable
in
the set area.
When "Air"
is
selected
in
Antenna
setting:
Press
.....
/~
to select "Start", and then press
ENTER.
When "Cable"
is
selected
in
Antenna
setting:
Press
Ja./T
to select "Analog
&.
Digital
Search Start" to search both analog and
digital broadcasts or "Analog Search Start"
to search only analog broadcasts, and then
press
ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press
ENTER.
Press MENU to exit.
•
If
no channel
is
found, confirm the type of connection made
with your
1V
and try
EZ
Setup again.
•
If
you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
If
initial setup does not memorize
all
the channels
in
your region, follow the instructions below
to
manually
memorize the channels.
Antenna setting
Press MENU
to
display the MENU screen,
and then press
.....
/~
to
select "Setup".
Press
Ja./T
to select "CH Setup", and then
press
ENT~R.
•
If
you already set the Secret No., input the
4-digit secret number here. See page 40 for
setting a secret number.
Press
Ja./T
to
select "Air/Cable", and then
press
ENTER.
Press
.....
/~
to
select "Air" or "Cable".
Press
ENTER to enter the setting.
Press
MENU to exit.
Channel search
Channel auto search makes the TV look for
all
channels
viewable
in
the set area.
Repeat steps 1 and 2
in
Antenna setting
in
Channel Setup.
Press
Ja./T
to
select "CH Search", and then
press
ENTER.
When "Air" is selected
in
Antenna
setting:
Press
.....
/~
to
select "Start", and then press
ENTER.
When "Cable"
is
selected
in
Antenna
setting:
Press
Ja./T
to
select "Analog & Digital
Search Start"
to
search both analog and
digital broadcasts or "Analog Search Start"
to
search only analog broadcasts, and then
press
ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press
ENTER.
Press MENU
to
exit.
•
If
no channel
is
found, confirm the type of connection made
with your
1V
and try channel search again.
•
If
you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
@-23
To Next Page
Loading...
