Basic adjustment settings
_.
~
•
-
-
Press
./T
to
select "PCM" or "Dolby
Digital", and then press
ENTER.
You can output digital audio
to
an
AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is
connected to the DIGITAL AUDIO OUTPUT terminal
on the 1V. Please select
an
audio output format
compatible with the audio format
of
the program you
are watching and the equipment connected.
Press
MENU
to
display the MENU screen,
and then press
......
/~
to select "Digital
Setup".
Press
./T
to
select "Audio Setup", and then
press
ENTER.
This setting. allows you
to
optimize the settings
of
Digital broadcasting.
..
-
.I
•
•
•
I
•
-
•
•
-
..
••
•
Five
minutes before the power shuts down, the
remaining time displays every minute.
Press
......
/~
to select "Enable", and then
press
ENTER.
Press MENU to display the MENU screen,
and then press
......
/~
to
select "Power
Control".
Press
./T
to select "No Signal Off", and
then press
ENTER.
Press MENU
to
exit.
Power control setting allows you to save energy.
No signal off
When set
to
"Enable", the power will automatically shut
down if there
is
no signal for 15 minutes.
• "Disable"
is
the factory preset value.
• When a
1V
program finishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there
is
no operation for 3 hours.
Press
MENU to display the MENU screen,
and then press
......
/~
to
select "Power
Control".
PCM
Dolby Digital
The optical output terminal outputs
audio signal
in
PCM form. If your
digital audio system does not support
Dolby Digital, select "PCM".
The optical output terminal outputs
audio signal
in
Dolby Digital form.
It
reproduces sound from surround
program of digital.
Press
./T
to select "No Operation Off", and
then press
ENTER.
Press MENU
to
exit.
Press
......
/~
to select "Enable", and then
press
ENTER.
•
Five
minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
• "Disable"
is
the factory preset value.
@-29
To Next Page
Loading...
