Using external equipment
To watch
an
HOMI
equipment image,
select.
"INPUT4", "INPUT5" or "INPUT6" from
"INPUT SOURCE" menu using
INPUT on the
remote control unit or on the 1V.
Press
MENU to display the MENU screen,
and then press
~/~
to
select "Option".
Press
./T
to select "HOMI Setup", and then
press
ENTER.
Press
./T
to select the desired item, and
then press
ENTER.
Press
~/~
to select the desired setting, and
then press
ENTER.
This setting. allows you
to
skip the HOMI Input on the
Input Selection operation.
Press
MENU
to
display the MENU screen,
and then press
~/~
to select "Setup".
Press
./T
to
select "Input Skip", and then
press
ENTER.
Press
~.IT
to
select the Input (INPUT
4,
INPUT
5,
INPUT
6)
you wish to skip, and then
press
ENTER.
Press
~/~
to
select "Yes", and then press
ENTER.
Press MENU
to
exit.
Auto View Enable
Disable
Set whether
or
not
to
use
View
Mode
based on signal
recognition, including
an
HDMI
signal.
Audio
Select
Digital
Analog
Select "Digital" for
an
audio
signal via the HDMI terminal.
Select "Analog" for an audio
signal via the R-AUDIO
-L
terminal.
Press MENU to exit.
• Refer
to
your external equipment operation manual for the
signal type.
• "Audio Select"
is
only available for INPUT
6.
• When connecting
an
HDMI-DVI conversion adapter/cable
to the HOMI terminal, the image may not come
in
clearly.
@-31
To Next Page
Loading...
