QUICK
REFERENCE
Ventilatio.n &Cleaning Tips
Keep your
AQUaS
television
in
a well ventilated area and make sure not to place it by a heat
source or use near water. The
AQUaS
television
is
designed for AC use only and should be
used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water
to
lightly moisten. Gently wipe and
"'f;;;;j\a
..
'/
/.:
..
./
~vo!d
pressing on the screen. To clean the outer cabinet, use the same method. Do not use
wIT[
;::>
-=-
liquid or aerosol cleaners. I
II
.....
"-
~
The screen
is
glass and can be scratched or broken when dropped or impacted.
STOP! To safely remove the AQUOS television from the box
• Itls best
to
use 2 people
to
remov~
the
AQUaS
television for stability.
• Lift onto installation location as the diagram illustrates.
QUICK
INSTALLATION TIPS
Attach your antenna
to
the back of the
AQUaS
television. (See page 12.)
How
to
turn on the
AQUaS
television for the
first time.
A)
Press POWER on
AQUaS
television.
POWER
SLEEP ope
o 0 ® 0 0
POWER
~l
- VOL + V
CH
A INPUT
B)
POWER indicator on the front of the
AQUaS
television lights GREEN.
Connect the AC plug for the
AQUaS
television into the AC outlet.
"----
..........
\~--c:J3
-+
IAC outlet I
• Place the
1V
close to the AC outlet, and keep the power
plug within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH
THE AC CORD CONNECTED.
Place the Ferrite core
in
the space indicated
in
the below figure and bundle the cords
properly with cable clamps and a cable tie.
POWER indicator
• Speakers cannot be detached from the
TV.
•
1V
angle cannot be adjusted.
Ferrite core
@-7
To Next Page
Loading...
