50
Watching 2D images in 3D
You can convert normal 2D images into 3D images.
1 Press 3D.
2 Press c/d to select “2D s 3D”, and then press
A.
3 Turn on the power of the 3D glasses, and then
wear the 3D glasses.
NOTE
• The confirmation message to select either 3D or 2D mode is
displayed on the screen once per hour.
• When the TV converts normal 2D images into 3D images, you
can display the “2D s 3D convert effect” menu to adjust the
convert effect by pressing Y.
Switching to the previous mode
You can switch back to the previous mode by pressing
3D.
1 Press 3D.
• A confirmation message is displayed.
2 Select “Yes”, and then press A.
• The TV returns to the previous mode.
3D Menu
Pressing 3D in 3D mode displays the 3D menu. Press
the coloured buttons to make the necessary settings.
Buttons Description
R button
3D brightness boost (Page 51).
G button
Surround (Page 26).
• The surround mode changes each
time you press G.
Y button
2D s 3D convert effect (Page 51).
• “2D s 3D convert effect” is available
only when selecting “2D s 3D” (refer
to Watching 2D images in 3D
shown above).
B button
3D setup (Page 51).
Enjoying 3D image viewing
To Next Page
Loading...
