58
Removing the stand
For wall mounting with the optional bracket (AN-52AG4)
remove the stand.
Before setting TV on the wall
• Remove the connected cables (DVD, VCR, etc) from the terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
1 Remove the stand cover.
1
Unfasten the screws at the 3 locations on the rear of the
stand cover.
2
Remove the stand cover.
2 Unfasten the 4 screws used to secure the stand in
place.
3 Detach the stand from the TV (hold the stand so it will
not drop from the edge of the base area).
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.
Appendix
To Next Page
Loading...
