On-Screen Display Menu
With this function activated,
the
SHARP
logo
will
be
displayed
when
you
turn on
the
TV.
• This function
is
not available when the TV
is
set
to
"Quick Start Mode".
With this item set
to
"On",
the
TV
will
give
off
operation
sound
when
you
use
the
SmartCentral
function.
• If an external speaker
is
used, the operation sound will
not be heard.
You
can
select the image from several
types
of
demo
mode.
If
you have selected "Auto Play", you need to select
the desired playback type(s), and then set the
playback time.
Continuous: Plays demos continuously.
10 min.: Plays demos every 10 minutes.
20 min.: Plays demos every 20 minutes.
• What kinds of setting item are available depends on
the model of your
lV.
• This function
will
be canceled when you press EXIT on
the remote control unit.
• "Demo Mode" may not be selected depending on input
signal type or application status.
• "Demo Mode" may be automatically canceled
depending on input signal type.
®-
26
Initial Setup
•
For
operating the on-screen display menu,
see
page
20.
• When you select "EZ Setup", "CH Setup", "Parental
CTRL" or "Reset", you can enter the 4-digit secret
number
here.
See page 27 for setting a secret number.
You
can
run EZ
Setup
again, even after
setting
up
the
preset channels.
Language: Select from among 3 languages
(English,
French and Spanish).
Location & Time: Make settings for the country,
area and time zone where you use the
lV.
Select your country: Select either "United
States", "Canada"
or
"Mexico".
Select your
time
zone: Select your time zone.
The available settings differ depending on the
selected country.
Select DST (Daylight Savings Time): Select
"Auto", "Manual" or "Off".
TV Location: Select "Home"
or
"Store" for the
location where you plan
to
install the
lV.
This
product qualifies for ENERGY STAR
in
Home
mode default setting.
Home: "Power Saving"
is
set
to
"Advanced", and
AV MODE
is
set
to
"STANDARD (ENERGY
STAR)".
Store: "Power Saving"
is
set
to
"Off" and AV
MODE
is
set
to
"DYNAMIC (Fixed)". Picture
Reset and Feature Demo can be set.
Picture Reset: AV MODE will be set
to
"DYNAMIC (Fixed)" regardless of whether
Picture Reset
is
"On" or "Off".
If
you select
"On",
AV
MODE will be reset to "DYNAMIC
(Fixed)"
if
there
is
no
operation for 30
minutes. When "Off"
is
selected, AV MODE
will be set
to
"DYNAMIC (Fixed)".
Feature Demo: When "On"
is
selected, after
all
the settings are completed, the Feature
Demo screen is displayed
if
there
is
no
operation for several minutes.
• ENERGY STAR qualification
is
based on AV
MODE "STANDARD (ENERGY STAR)".
Antenna & Cable/STB: Select the type of
connection you will use to watch
lV.
Air/Cable: Make sure what kind of connection
is
made with your
lV
when selecting "Air"
or
"Cable".
CH Search: Channel auto search makes the
lV
look
for
all
channels viewable
in
the set area.
•
If
"Cable"
is
selected for Antenna setting,
scrambled channels are removed after the
Channel search has been completed.
Network: When you connect to the Internet
on
the
lV,
confirm the connection method and make
adjustments.
• Wireless LAN connection
is
possible only when
the WPS (push button) method
is
used. If any
other method
is
used, make settings by Initial
Setup
> Internet Setup > Network Setup.
(See
pages 44
to
45.)
Completed: The settings confirmation screen
is
displayed. Confirm the information displayed on
the screen.
• See Initial Installation on pages 14 to 15 for setting
each item.
• If no channel
is
found, confirm the type of connection
made with your
lV
and try
"EZ
Setup" again.
• If you select "Analog Search Start" and initiate the
channel search, the CH Memory for Cable Digital will
be deleted.
If Initial Installation
does
not
memorize
all
the
channels in
your
region, follow
the
instructions
below
to
manually
memorize
the
channels.
Air/Cable: Make sure what kind
of
connection
is
made with your
lV
when selecting "Air" or
"Cable".
CH
Search: Channel auto search makes the
lV
look
for
all
channels viewable
in
the set
area.
CH Memory: You can select the channels to skip
in
each ANALOG
(Air),
ANALOG (Cable), DIGITAL
(Air)
and DIGITAL (Cable).
On: Skips channels. (Channel selection disabled
using
CH
/\IV.)
Off: Does not skip channels. {Channel selection
enabled using
CH/\IV.)
Remove Scrambled CH: This function makes the
lV
look for and then delete digital cable channels
that are scrambled and so unavailable
in
the
set area. The process may take more than 20
minutes.
Yes: Starts to remove scrambled channels.
No: This function does not work.
• See Initial Installation on pages 14 to
15
for setting
each item.
•
If
no channel
is
found, confirm the type of connection
made with your
lV
and try channel search
again.
•
If
you select "Analog Search Start" and initiate the
channel search, the CH Memory for Cable Digital
will
be deleted.
fav~te<:;H(Favome
Cban~l
~ttiog)
This
function
allows
you
to
program
4 favorite
channels, in 4 different categories. By setting the
favorite
channels
in
advance,
you
can select
your
favorite
channels
easily.
To
register
your
favorite
channel:
Select "Register" and then press ENTER. Press
JJ..I
T I ... I ...
to
select the position
in
the category, and
then press
ENTER to register.
To
delete
your
favorite
channel:
Select
"1
Data Clear" and then press ENTER.
Press
1!;,/T
I
..,.1.,.
to select the channel you want
to delete, and then press
ENTER. Select "Yes" and
then press
ENTER.
To delete
all
the favorite channels, select
"All
Data
Clear".
• Before setting the channel, select the channel you
want
to
register
as
a favorite channel.
• You can display the "Favorite CH" screen by pressing
FAVORITE
CH
on the remote control.
In
order
to
receive digital air broadcasts, you
need
a digital
broadcast
antenna. You can confirm
the
antenna
configuration
through
the
"Antenna
Setup-
DIGITAL"
screen.
If necessary, adjust the
direction
of
the
antenna
to
obtain
the
maximum
signal strength.
Signal Strength: The signal strength of DIGITAL
channel
is
displayed. The signal information
is
based on the current channel.
Channel Strength: Input the 2-digit channel number
to
check the signal strength of the selected
channel.
Make sure the signal
is
strong enough
for each channel.
• This function
is
available for
DIGITAL
(Air)
only.
To Next Page
Loading...
