Using the
30
Glasses
NOTE
• These 3D Glasses are only for use with SHARP LCD TVs supporting 3D.
•
30
Glasses lenses
• Do not apply pressure
to
the lenses
of
the 3D Glasses. Also,
do
not drop
or
bend the 3D Glasses.
• Do not scratch the surface
of
the lenses
of
the 3D Glasses with a pointed instrument
or
other object. Doing so may
damage the 3D Glasses and reduce the quality
of
the 3D image.
• Use only the cloth provided with the 3D Glasses
to
clean the lenses.
• Caution during viewing
• Do not use devices that emit strong electromagnetic waves (such as cellular phones
or
wireless transceivers) near
the 3D Glasses. Doing so may cause the
3D
Glasses
to
malfunction.
• The 3D Glasses cannot operate fully
at
extreme high
or
low temperatures. Please use them within the specified
usage temperature range.
• If the 3D Glasses are used
in
a room with fluorescent lighting (60 Hz), the light within the room may appear
to
flicker.
In
this case, either darken
or
turn off the fluorescent lights when using the 3D Glasses.
• Wear the 3D Glasses correctly.
3D
images will not be correctly visible if the 3D Glasses are
worn
upside
down
or
back-to-front.
• Other displays (such as computer screens, digital clocks, and calculators) may appear
dark
and difficult
to
view while
wearing the 3D Glasses. Do not wear the 3D Glasses when watching anything other than
3D
images.
• If you lie on your side while watching the TV with
3D
Glasses, the picture may look dark
or
may not be visible.
• Be sure
to
stay within the viewing angle and optimum TV viewing distance when watching
3D
images. Otherwise,
you may not
be
able
to
enjoy the full 3D effect.
• The
3D
Glasses may not
work
properly if there
is
any other 3D product
or
electronic devices turned
on
near the
glasses
or
TV.
If this occurs, turn off the other 3D product
or
electronic devices
or
keep
the
devices as far away as
possible from the 3D Glasses.
• Stop using this product
in
any
of
the following situations:
- When images consistently appear doubled while you are wearing the 3D Glasses
- When you have difficultly perceiving
the
3D
effect
• If the
3D
Glasses are faulty
or
damaged,
stop
using them immediately. Continued use
of
the
3D
Glasses may cause
eye fatigue, headaches and illness.
• If you have any abnormal skin reaction, stop using the 3D Glasses.
In
very rare instances, such reactions may
be
due
to
an allergic reaction
to
the coating
or
materials used.
• If your nose
or
temples become red
or
you experience any pain
or
itchiness, stop using the
3D
Glasses. Pressure
caused
by
long periods
of
use may lead
to
such reactions and may result
in
skin irritation.
Problem
• Images displayed
in
3D mode
appear doubled while you are
wearing the 3D Glasses.
[§]
• Images displayed
in
3D mode
appear 2D while you are wearing
the 3D Glasses.
[QJ
Possible Solution
• Is the
power
of
the 3D Glasses turned on?
• Press the power button for
at
least 2 seconds
to
turn on the 3D
Glasses.
• Are the 3D Glasses set
to
2D mode?
• Press the
power
button while viewing 2D images, the LED light blinks
in
green and the 2D images switch
to
3D images.
EN-8
To Next Page
Loading...
