Sharp AQUOS sense2

- 3 -
Inserting/Removing the Card
microSD
card
nanoSIM
card
Display side
Insert in
the tray
z When inserting/removing a nanoSIM card or microSD card, make sure to
insert/remove the card into/from the correct location in the correct direction
after you turn off the power.
z The tray is installed in the handset.
z The tray is required to load the nanoSIM card. Make sure not to lose it.
z Hook the tip of your finger into the groove and pull the card tray out toward
you.
z When inserting the nanoSIM card, load it onto the tray and insert the tray
into the handset.
z When inserting the tray, return it to its original location. Be sure not to
insert it into another place.
z To maintain waterproof/dustproof performance, securely push in the tray
and make sure there is no space between the handset and the tray.
z SH-M08 is compatible with commercially available microSD cards of up to
2 GB, microSDHC cards of up to 32 GB, and microSDXC cards of up to
512 GB (as of March 2019)*.
* Up to Class 10 of SD Speed Class and Class 1 (DDR50) of UHS Speed
Class can be used.
* Speed Class as stated above indicates the performance of a microSD
card. All the operations related to the performance indicated by Speed
Class are not completely guaranteed.
z Since the rental smartphone uses a data SIM, you cannot make calls to an
emergency number (110, 119 or 118).