Sharp AQUOS sense2

- 4 -
Charging
The internal battery is not fully charged. Be sure to charge the battery
before use.
 Cautions while charging
z The battery can also be charged with the handset turned on (While
charging, the battery icon appears with [ ] superimposed).
z Do not charge for a long time with the power left turned on.
z If the handset is left for a long time even after the charging is completed, the
battery level may decrease.
z When the battery is empty and the handset is being charged, the charging
lamp may not illuminate immediately. However, charging is in progress.
z If the battery empty alert is displayed and the power cannot be turned on,
charge the battery for a while.
z While charging, the handset may not be turned on even when the charging
lamp is illuminated in red. Charge longer and try turning the power on again.
z Frequently recharging the battery when its power is still remaining enough
may shorten the usable life of the internal battery. It is recommended to use
the battery to a certain level (e.g. after the battery level decreases) before
recharging.
z When the battery becomes warm, charging may automatically stop even
if the battery has not been fully charged. Charging automatically resumes
after the temperature lowers to an appropriate temperature.
 Charging with AC adapter
z The specified adapter (SH-AC04) supports from 100 to 240 V AC.
z When you start charging, the charging lamp illuminates. Even when the
battery is fully charged, the charging lamp does not turn off.(Refer to page
5)
z The shape of the plug for the specified AC adapter is for 100V AC (for
domestic use).
z Note that inserting or removing the equipment forcibly may cause damage
to the USB Type-C connection jack and the Type-C plug or result in a
malfunction.
 Charging with USB Type-C cable
z You can charge the handset by connecting the handset to a PC with the
specified SH-AC04 USB Type-C cable.