Sharp AQUOS sense3

155
Handset Settings
Mobile network
1
In the home screen, select “apps folder”▶
[Settings]▶[Network & Internet]▶[Mobile
network]
2
Select an item

Mobile data: Set whether to access data via mobile
networks.

Data roaming: For details
☞
P. 200 “Data roaming”

App data usage: For details on app data usage
☞
P. 156
“Data usage”

Call mode setting: Set whether to use VoLTE.

Preferred network type: For details
☞
P. 200 “Preferred
network type”

Automatically select network: For details on selecting the
network automatically
☞
P. 201 “Network operator settings”

Network: For details
☞
P. 201 “Network operator settings”

Access Point Names: Set and check an access point.

Setting an access point
An access point (sp-mode) for Internet connection is registered by
default. You can add other access points and change them if
necessary.
For details on sp-mode, refer to the DOCOMO website.
( https://www.nttdocomo.co.jp/service/spmode/ ) (in Japanese only)
If you use mopera U or Business mopera Internet, add an access
point of either provider manually.
For details on mopera U, refer to the mopera U website.
( https://www.mopera.net/ ) (in Japanese only)
1
In the home screen, select “apps folder”▶
[Settings]▶[Network & Internet]▶[Mobile
network]▶[Advanced]▶[Access Point Names]
z
You can check an access point in use.
2
[ ]
3
[Name]▶enter the name of the network profile
to create▶[OK]
4
[APN]▶enter the access point name▶[OK]