Sharp AQUOS sense3

42
Before Using the Handset
Charging with USB cable
You can charge the handset by connecting the handset to a
PC with USB cable A to C 02 (sold separately), etc.
z
For details on connecting to a PC or other device
☞
P. 194
“Connecting to PC and other device”
Turning power on/off

Turning power on
1
3 (Power key) (for at least 3 seconds)
z
When you turn the power on for the first time, make the initial
settings (
☞
P. 43 “Initial settings”).

Turning power off
1
3 (Power key) (for at least 2 seconds)
2
[Power off]

Turning display on/off
The display is turned off when
3
(Power key) is pressed or the
handset is not in use for a set length of time.
Press
3
(Power key) while the display is turned off to turn it on.

Touch panel lock
When the power or the display is turned on, the touch panel is
locked.
Touch [
] to unlock.
z
When [Lock Photo Shuffle] is ON, the image for the lock screen
of the touch panel is automatically switched every time the
display is turned on (
☞
P. 162 “Display”).
Operations in touch panel lock screen
z
To activate Camera: [ ]
z
To activate my daiz: [
]
z
To activate Clock: Touch the clock
z
To display the status panel: Drag the screen down
z
To display the expanded status panel: Drag the status bar down