Sharp AQUOS sense3

184
Handset Settings
3
Select the type of a device from which you
import data
z
When the confirmation screen for the backup data on the
microSD Card is displayed, select [Import phonebook data
from smartphone.].
4
[Next]
5
Enable the Bluetooth function of the device
from which you import data▶[Next]
z
When the device from which you import data is Android, set
the device to be displayed on the handset.
6
Select the device from which you import data
7
[Start]
z
When the confirmation screen about the settings on pairing
appears, select [PAIR].
z
Perform any operations required on the device that is the
import source, such as enabling permission to access the
contacts.
8
[NEXT]
9
[Add registration]/[Delete before registration]▶
[OK]
z
If there are multiple accounts, the screen for selecting to
which account to register is displayed.
10
[OK]

Take over via Wi-Fi
If transfer data from an iPhone device, it is recommended to
transferring via Wi-Fi.
1
In the home screen, select “apps folder”▶
[Settings]▶[System]▶[Advanced]▶[Data
transfer]▶[Take over via Wi-Fi.]
z
Follow the instructions on the screen after this step.
Reset options
1
In the home screen, select “apps folder”▶
[Settings]▶[System]▶[Advanced]▶[Reset
options]
2
Select an item

Reset Wi-Fi, mobile & Bluetooth: Reset all settings related to
Wi-Fi, mobile data, and Bluetooth.

Reset app preferences: Reset all contents set in each app.

Erase all data (factory reset): Reset all data in the handset
memory.
[Erase all data (factory reset)]
z
If you enable [Delete data in SD card as well.], data on a
microSD Card are also erased at the same time.
z
The following data are erased.

Data that are created, saved or registered

Contents that are set in the “Settings” app

Downloaded apps