Sharp AQUOS SH-02L - Page 206

z
Calls are not available ([ ] does not disappear even
after moving to another place or calls cannot be made/
received even though signal status is not bad)
y
Turn the power on again or attach the battery pack
or docomo nano UIM card again.
☞
P. 50 "docomo
nano UIM card", P. 58 "Battery pack", P. 64
"Turning power on/off"
y
Depending on the signal type, even though status is
"inside the service area" or "[
] (indicating signal
status) appears", making/receiving a call may not be
available. Move to another place and call again.
y
Make sure the call restriction such as Reject call
setting is not set.
☞
P. 89 "Reject call setting"
y
In a crowded place, heavy telephone/mail traffic may
make it difficult to get a connection depending on
how congested the radio waves are. In this case,
"Please wait for a while(voice call)" is displayed, and
a busy tone is played. Move to another place or call
again later.

Screen
z
Main display is dark, difficult to see and/or unnatural
color.
y
Make sure Screen timeout is not set to a short
duration.
☞
P. 148 "Wallpaper/display"
y
Make sure [Hakkiri View] is not enabled.
☞
P. 148
"Wallpaper/display"
y
Make sure [RelaxView] is not enabled.
☞
P. 148
"Wallpaper/display"
y
Make sure the setting of Brightness is not changed.
☞
P. 149 "Brightness level"
y
Make sure [VeilView] is not enabled.
☞
P. 149
"VeilView"
y
Make sure [Energy saving] is not set.
☞
P. 188
"Energy Saving"

Sound
z
The other party's voice is not heard well or is too loud
during a call
y
Make sure [Smooth talk] is not set.
☞
P. 90
"Voice Quality"
y
Make sure [Clear talk] is not set.
☞
P. 90 "Voice
Quality"
y
Make sure you have not changed the in-call volume.
☞
P. 150 "Sound/vibration"

Mail
z
Mail is not automatically received
y
Is Auto reception setting set to [Confirm every time]
or [OFF]?
☞
P. 98 "Receiving docomo mail"

Camera
z
Still picture or video shot by the camera is blurred
y
Switch Focus Setting in the advanced settings to
[Macro] when shooting a nearby subject.
☞
P. 114
"Detail Settings",
☞
P. 116 "Detail Settings"
y
Make sure the camera lens is neither misted up nor
exposed to dirt.
☞
P. 110 "Before using camera"
204
Appendix/Index