Battery pack PC resin
Terminal section Copper alloy/Gold coating
Water wet determination
seal
High quality paper/PET
resin
Label PET resin/print
Desktop holder (top case/
bottom case)
ABS resin
Attachment label
Polyester resin/
Printing+PET resin
Terminal lever POM resin
Lock lever POM resin
Charging terminal Copper alloy/Gold coating
Metal section of
connecting terminal
SUS+copper alloy/Tin
plating, gold plating
Screw Iron/Plating
Rubber base Foamed urethane
Production lot label Paper/Printing+PET resin
Handling precautions
General notes
z
The battery pack, adapter, desktop holder and docomo
nano UIM card are not waterproof/dustproof. Do not
use in humid or steamy areas such as bathrooms and
places exposing to rain and other forms of moisture. If
they are carried close to the skin, perspiration may
cause internal components to corrode and result in
malfunction. Note that if a problem is found to be due
to moisture, the handset and parts are not covered by
warranty and in some cases may be irreparable. For
repairs, contact "Troubleshooting & Repairs" (in
Japanese only) on the last page of this manual or
DOCOMO specified repair office.
z
y
Forceful rubbing of the display with a dry cloth etc.
may scratch its surface.
y
Water drops, dirt, etc. left on the display may cause
stains to form on its surface.
y
Never use chemicals such as alcohol, thinners,
benzene or detergents, as these agents may erase
the printing or cause discoloration.
22
Contents/Precautions
To Next Page
Loading...
