75
Data Communication
SH-04F_E_09.fm
[75/77]
To enter authentication code is required for sending and
receiving all data. The authentication code is a password
exclusive to iC communication. Before starting data
communication, the sender and receiver must enter the same
user-specified four-digit code. In addition, to enter passcode
may be required for sending all data.
■ Sending data
Example: Still picture
1
In the home screen, [R]/[Contents
Manager]/[Photo]
2
Touch and hold a still picture/[Share]/[Send
by IC]
3
[Ok]
4
Place the a mark over that of the other party’s
device
■ Receiving data
1
Place the a mark over that of the other party’s
device
2
[Accept]
3
Drag the status bar down/select the received
data
You can connect the handset to Bluetooth devices wirelessly.
Wireless communications with all the Bluetooth devices are not
completely guaranteed.
■ Specifications
Supported version
Bluetooth standard Ver.4.0
*1
Output
Bluetooth standard Power Class 1
Supported profiles
*2
(Supported services)
HSP: Headset Profile
*3
HFP: Hands Free Profile
*4
A2DP: Advanced Audio Distribution Profile
*5
AVRCP: Audio/Video Remote Control Profile
*5
HID: Human Interface Device Profile
*6
DUN: Dial-up Networking Profile
*7
OPP: Object Push Profile
*8
SPP: Serial Port Profile
*9
PBAP: Phone Book Access Profile
*10
PAN: Personal Area Networking Profile
*11
HDP: Health Device Profile
*12
PXP: Proximity Profile
*13
FMP: Find Me Profile
*14
ANP: Alert Notification Profile
*15
PASP: Phone Alert Status Profile
*16
TIP: Time Profile
*17
HOGP: HID Over GATT Profile
*18
*1 The handset and all Bluetooth function-installed devices have
ensured that they conform to the Bluetooth specification
according to the rules that the Bluetooth SIG defines, and are
all authenticated. However, operating methods might differ or
data might not be exchanged even when they are connected
wirelessly, depending on the features or specifications of
connected devices.
*2 Standardizes the communication procedures of Bluetooth
device per feature of a device.
*3 Connect a commercially available Bluetooth compatible
headset to the handset to talk wirelessly.
*4 Connect a commercially available Bluetooth compatible
hands-free device such as a car navigation system to the
handset to talk during hands-free operation using the car
navigation system etc.
*5 Connect a commercially available Bluetooth compatible audio
device to the handset to play music, TV audio, etc. wirelessly.
Also, remote control operation may be available from Bluetooth
devices. However, compatible devices may be limited
depending on the data type.
*6 Connect a commercially available Bluetooth compatible input
device such as a keyboard and mouse to the handset to
operate the handset from the device.
*7 Connect a Bluetooth compatible PC etc. to the handset to use
the handset as a modem and make data communications. Note
that packet communication charges are incurred. You cannot
use mobile networks on the handset during DUN connection.
*8 Connect a Bluetooth device to the handset with the file transfer
service to send and receive data between them.
*9 Set the virtual connection with a serial cable and interconnect
between devices.
*10 Transfer phonebook data on the handset memory to a
Bluetooth device. Data may not be displayed correctly on the
other party’s device depending on the contents of the
transferred phonebook data.
*11 Join a PC network etc. and share the Internet connection. Also,
connect a PC etc. to the handset via Bluetooth to use the
Bluetooth tethering.
*12 Communicate data with a commercially available health
appliance compatible with Bluetooth such as a weighing
machine.
*13 Make a Bluetooth device ring or vibrate when the Bluetooth
connection is terminated after it is moved away from the
handset.
*14 Make the handset/a Bluetooth device ring or vibrate by
operating the handset/the Bluetooth device.
*15 Notify you of incoming calls, new mails, etc. through a
Bluetooth device.
*16 Stop the ringtone or the vibrator of the handset by operating a
Bluetooth device.
*17 Synchronize clocks between a Bluetooth device and the
handset.
*18 Connect a Bluetooth Smart device such as a keyboard and
mouse to the handset to operate the handset from the device.
Sending and receiving by iC
Bluetooth function
Refer to the manual for the Bluetooth device as well.
The settings of access points for DUN profile can be changed
from a Bluetooth device such as a PC or car navigation system.
If connection to an access point via DUN profile becomes
unavailable, it is recommended to initialize access points
(nP. 22 “Resetting an access point”).
You may not hear TV audio etc. with Bluetooth devices which
are not compatible with SCMS-T.
SH-04F_E.book 75 ページ ２０１４年５月１９日 月曜日 午後３時５０分
To Next Page
Loading...
