SCAN
25
CONTENTS INDEX
Scanning from a WIA-Compliant Application (Windows XP/Vista)
(part 1)
If you are using Windows XP/Vista, you can use the WIA driver to scan from Sharpdesk, Paint and other WIA-compliant applications.
The procedure for scanning using Paint is explained in the following.
1
Place the original that you wish to scan on the
document glass/RSPF.
☞For information on setting an original for scanning,
refer to "NORMAL COPYING" in the Operation
Manual.
2
Start Paint and then click the "File" menu and
select "From Scanner or Camera".
The scan screen of the WIA driver will appear.
If you have WIA drivers for other devices installed in your
computer, the "Select Device" screen will open. Select
"SHARP AR-XXXX" and click the "OK" button.
Note
To Next Page
Loading...
Need help?
General
