12
GETTING STARTED
Loading copy paper
LOADING COPY PAPER
8
To set the selected paper size, press the PAPER SIZE
ENTER (
) key.
●
The selected paper feed location indicator will blink and the corre-
sponding paper size (which is currently set) indicator will light up
steadily. All other indicators except the START (
) key indicator
will go out.
If copying is being performed, paper size setting cannot
be made .
9
Use the ORIGINAL SIZE ENTER (
) key to select
the paper size which is set.
●
Each time the ORIGINAL SIZE ENTER (
) key is pressed,
a paper size will be indicated with a paper size indicator.
10
Press the START ( ) key and then the PAPER SIZE
ENTER (
) key.
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
