27
MAKING COPIES High image quality mode
HIGH IMAGE QUALITY MODE
This mode improves copy image quality in the automatic and manual
exposure modes by increasing copy density with a slight increase of toner
consumption. Selection of this mode does not affect the PHOTO mode.
Follow the procedure below for setting the toning level.
1
Press the AUTO/MANUAL/PHOTO (
/ / ) key to
select the MANUAL ( ) mode.
2
Press and hold down the AUTO/MANUAL/PHOTO (
/
/ ) key for approximately 5 seconds.
●
The MANUAL (
) indicator will go out and the PHOTO ( )
indicator will begin to blink.
●
The exposure indicator marked “1” will light up, indicating that the
standard toner mode is active.
3
To enter the high image quality mode, press the dark
(
) key.
●
The exposure indicator marked “5” will light up, indicating that the
high image quality mode is selected.
4
Press the
AUTO/MANUAL/PHOTO
( / / ) key.
●
The PHOTO (
) indicator will stop blinking and will light up
steadily. The high image quality mode is now active.
●
To return to the standard mode, repeat the procedure but use the light
(
) key to select exposure level “1” in step 3.
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
