22
MAKING COPIES
XY zoom
XY ZOOM
5
Use the PRESET RATIO selector (
, ) keys and
zoom (
, ) keys to change the copy ratio in the
horizontal direction in a similar manner as for the vertical
direction.
6
Press the copy ratio display (
) key.
●
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
●
To verify the copy ratios, press and hold down the copy ratio display
(
) key. The vertical and horizontal ratios will be alternately
displayed.
7
Ensure that copy paper of the desired size is installed in
the paper tray.
●
If desired, the bypass tray can be selected by pressing the TRAY
SELECT (
) key.
8
Set the number of copies.
9
Press the START (
) key.
●
To change the copy ratios again, press a PRESET
RATIO selector (
, ) key or a zoom ( , )
key. Then, perform step 3 and the succeeding
steps.
●
To cancel this function, press the XY-ZOOM (
)
key again.
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
