52
GENERAL INFORMATION
SPECIFICATIONS
Specifications
●
First-copy time may differ depending on operating conditions, such as power-supply voltage and
room temperature.
As a part of our policy of continuous improvement, SHARP reserves the right
to make design and specification changes for product improvement without
prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values
in individual units.
Overall dimensions 590 mm (W) x 531 mm (D)
(with bypass tray folded) (23-15/64" (W) x 20-29/32" (D))
Weight Approx. 32 kg (70.6 lbs.)
Toner cartridge included
Copier dimensions 590 mm (W) x 531 mm (D) x 470 mm (H)
(23-15/64" (W) x 20-29/32" (D) x 18-33/64" (H))
Operating conditions Temperature: 15°C to 30°C (59°F to 86°F)
Humidity: 20% to 85%
Acoustic noise emission Sound power level LWA
(measurement according Operating: 6.1 [B], Standby: 3.2 [B]
to ISO 7779) Sound pressure level LPA (Bystander positions)
Operating: 47 [dB (A)], Standby: 17 [dB (A)]
Sound pressure level LPA (Operator positions)
Operating: 50 [dB (A)], Standby: 18 [dB (A)]
Emission concentration Ozone: less than 0.02 mg/m
3
(measurement according to Dust: less than 0.075 mg/m
3
RAL-UZ 62) Styrene: less than 0.07 mg/m
3
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
