Main Sub
Item Content
Adjustment
code code range
22 01 Displays
maintenance
counter.
SIMULATION NO.22- 1
MAINTENANCE COUNTER DISPLAY
MAINTENANCE: XXX,XXX
[PAUSE]KEY: END DISPLAY
[Content] The current maintenance counter value is displayed.
(a) Operation/display
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
02 Displays
maintenance
preset counter.
SIMULATION NO.22- 2
MAINTENANCE PRESET COUNTER DISPLAY
MAINTENANCE PRESET: XXX,XXX
[PAUSE]KEY: END DISPLAY
[Content] The maintenance preset counter value is displayed.
(a) Operation/display
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
04 Displays total
JAM counter.
• JAM counter screen
SIMULATION NO.22- 4
TOTAL MISFEED COUNTER DISPLAY
TOTAL JAM : XXX,XXX
[?]KEY: JAM MAP DISPLAY
[PAUSE]KEY: END DISPLAY
• JAM map screen
SIMULATION NO.22- 4
PAPER MISFEED MAP DISPLAY
XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX
XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX
(1/5)
[→]KEY: NEXT PAGE DISPLAY
[?]KEY: RETURN TO JAM COUNT DISPLAY
[PAUSE]KEY: END DISPLAY
→(1/5)~(5/5)
[Content] The current total JAM counter value is displayed. If the [?] key is pressed, the
causes of the 50 paper misfeed errors which have occurred recently are dis-
played, with the cause of the paper misfeed error which has occurred most recent-
ly appearing first.
If the number of the paper misfeed errors which have occurred is less than 50,
“----” is displayed in each cause area.
9 – 32
To Next Page
Loading...
