Main Sub
Item Content
Adjustment
code code range
24 04 Clears RADF
counter.
SIMULATION NO.24- 4
RADF COUNTER
WOULD YOU MIND IF CLEARING EXECUTE?
1. EXECUTE 2. CANCEL
SELECT WITH TEN KEY
• [1] key
SIMULATION NO.24- 4
RADF COUNTER
COMPLETED CLEARING
RADF COUNTER DISPLAY
RADF: 000,000
[PAUSE]KEY: END DISPLAY
[Content] The RADF counter is cleared and then the RADF counter screen is displayed.
(a) Operation/display
[1]: The simulation is executed and the screen changes to the RADF counter
screen.
[2]: The simulation is stopped and the screen returns to the sub code input
screen.
If any key other than [1] or [2] is pressed, the error buzzer sounds.
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
05 Clears staple
counter.
SIMULATION NO.24- 5
STAPLE COUNTER
WOULD YOU MIND IF CLEARING EXECUTE?
1. EXECUTE 2. CANCEL
SELECT WITH TEN KEY
• [1] key
SIMULATION NO.24- 5
STAPLE COUNTER
COMPLETED CLEARING
STAPLE COUNTER DISPLAY
STAPLE: 000,000
[PAUSE]KEY: END DISPLAY
9 – 41
To Next Page
Loading...
