Main Sub
Item Content
Adjustment
code code range
24 08 Clears copy
counter.
SIMULATION NO.24- 8
COPY COUNTER
WOULD YOU MIND IF CLEARING EXECUTE?
1. EXECUTE 2. CANCEL
SELECT WITH TEN KEY
• [1] key
SIMULATION NO.24- 8
COPY COUNTER
COMPLETED CLEARING
COPY COUNTER DISPLAY
COPY COUNTER: 000,000
[PAUSE]KEY: END DISPLAY
[Content] The copy counter is cleared and then copy counter is displayed.
(a) Operation/display
[1]: The simulation is executed and the screen changes to the copy counter
screen.
[2]: The simulation is stopped and the screen returns to the sub code input
screen.
If any key other than [1] or [2] is pressed, the error buzzer sounds.
[PAUSE]: The execution of the simulation is stopped and the screen returns to the
sub code input screen.
[CA]: The execution of the simulation is stopped and the simulation is terminated.
09 Clears PDA/ZR
print counter.
SIMULATION NO.24- 9
PDA/ZR PRINT COUNTER
WOULD YOU MIND IF CLEARING EXECUTE?
1. EXECUTE 2. CANCEL
SELECT WITH TEN KEY
• [1] key
SIMULATION NO.24- 9
PDA/ZR PRINT COUNTER
COMPLETED CLEARING
PDA/ZR PRINT COUNTER DISPLAY
PDA/ZR PRINT COUNTER: 000,000
[PAUSE]KEY: END DISPLAY
9 – 43
To Next Page
Loading...
