Sharp AR-5132 - Page 198

• Details of key operator program list (copy)
P number
Message-related
information
Message Key input 1 Key input 2 Action Remarks
(Introduction) Enter key operator code ---- Enter key
operator code
(00000 ∼
99999)
(Introduction) After entering
key operator
code
Enter program number.
After entering, press [PRINT].
P=---
Enter
program
number
[PRINT] Key operator setting
screen
2-digit input is possible
P10 P10: Department counter
setting is possible.
1,2 [PRINT] Factory set for 2: Clear
1: Set
2: Clear
P11 P11: Adding up copy count. 5-digit input
or scroll key
After 5-digit
input, press
[PRINT].
The total copy counter
counts only the
number of valid copies.
Enter the department number
you want to display.
After entering, press [PRINT].
Department number: 00000
Number of copies to be used:
00000
P13 P13: Erases added-up copy
count.
1,2
1: Delete in all
departments
2: Delete in each
department
P14 P14: Sets department number
1: Registration
2: Delete
3: Change
4: Display
P16 P16: Limits the number of
copies (account limit)
1,2
1: Set
2: Clear
P18 P18: When 3 wrong
department numbers
are entered in
sequence, produce
alarm?
1,2
1: Yes
2: No
P19 P19: Key operator code
change
Enter key
operator code
(00000 ∼
99999)
[PRINT] Key operator code is
changed.
Factory set for 00000.
Enter a new code. After
entering, press [PRINT]
(00000 ∼ 99999). 00000
P20 P20: Auto exposure level
adjustment
1,2,3,4,5 Factory set for
"Standard"
1: Light
2: Little light
3: Standard
4: Little dark
5: Dark
9 – 102