Sharp AR-5132

P number
Message-related
information
Message Key input 1 Key input 2 Action Remarks
P72 P72: Disables the use of
manual feed tray during
automatic duplex
copying
1,2 Factory set for
"Enable"
1: Disable
2: Enable
P73 P73: Disables the rewriting of
registered copy
condition
1,2 Factory set for
"Enable"
1: Disable
2: Enable
P74 P74: Disables the use of
document automatic
feeder
1,2 Factory set for
"Enable"
1: Disable
2: Enable
P75 P75: Disables the use of
automatic duplex
copying function
1,2 Factory set for
"Enable"
1: Disable
2: Enable
P76 P76: Disables the use of
staple
1,2 Factory set for
"Enable"
1: Disable
2: Enable
P80 P80: Disables copying when
size/direction alarm is
produced
1,2 Factory set for
"Enable"
1: Disable
2: Enable
P83 P83: Enables PC modem
access
1,2 Factory set for
"Disable"
1: Enable
2: Disable
P90 P90: Program list → [PRINT] Each screen displays
3 programs and their
settings.
Programs which
allows "Set/Clear" or
"Disable/Enable" have
"●" at their left-hand
side when Set or
Disabled. (Refer to
Appendix 2.). Three
program names are
displayed for each
screen, with one
name in reverse
video. You can scroll
the screen with the
[→] key, and you can
enter the program
displayed in reverse
video by pressing the
[PRINT] key.
Selection: Press [→].
Execution: Press [PRINT]
9 – 105