Sharp AR-6020DV

AR-6020V DISASSEMBLY AND ASSEMBLY 10 – 18
(4) Bypass tray paper feed clutch
1) Remove the E-ring, and remove the bypass tray paper feed
clutch.
K. Power section
(1) High voltage PWB
1) Remove all harnesses to the power unit, and remove the
power unit.
(2) Power unit
1) Remove all harnesses to the high voltage PWB, and remove
the high voltage PWB.
(3) Power switch
1) Remove the harnesses to the power switch with pressing the
harnesses inside.
2) Remove the power switch.
L. Developing section
(1) Developer
1) Remove the cartridge guide unit.
No. Contents
1 High voltage PWB
2 Power unit
3 Power switch
4 Power unit fan
No. Contents
1 Developer
2 Toner filter unit
3 DV side sheet F/ DV side sheet R
4 Developing cartridge
5 Developing doctor
6MG roller
7 Toner sensor
Ĭ
Ĭ
ĭ