30
SETUP
Printing using the IPP function
The machine can print using the IPP function. When the machine is in a remote location, this function can be used in
place of the fax function to print a higher quality image than a fax. If you wish to use the IPP function, follow these
steps to select the PPD file when configuring the printer driver (step 12 on page 29).
1
Click the "IP" icon.
If you are using Mac OS X v10.4, click the "IP
Printer" icon.
2
Select "Internet Printing Protocol" in
"Protocol". Enter the address of the
machine (IP address or domain name) and
the queue name.
Enter "ipp" in "Queue".
3
Select "Select a driver to use" (or "Select
Printer Software") from "Print Using" and
click the PPD file for your model.
If you are using Mac OS X v 10.5 to 10.7, select
"Sharp" in "Print Using" and click the PPD file of
your model.
4
Click the "Add" button.
The screen for the machine configuration appears.
Make sure that the settings are correct and click
the "OK" button.
If you are using Mac OS X v10.5 to 10.6, click the
"Continue" button.
This function can be used on network function standard models and on models with the network expansion kit
installed.
Note
To Next Page
Loading...
