Sharp AR-6023DV

AR-6020V CONSUMABLE PARTS 3-2
F. I r a n
2.Maintenance parts list
A. AR-6020V/6020V E/6023V/6020DV/6020DV E/6023DV/6023DV E/6020NV/6020NV E/6120NV/6023NV/6023NV E
B. AR-6026N/6026NR/6031N/6031NR/6131N/X311N
* The other maintenance parts than the above are supplied as service parts.
3. Environmental conditions
A.Use conditions
B.Life(packed conditions)
Photoconductor drum (36 months from the production month)
Developer, toner (24 months from the production month)
No. Name Product name Content Life Remark
1 Toner cartridge(Black) MX-237XT Toner cartridge x1 23K
Life setting by A4 6% document
and Toner save mode
2 Toner cartridge(Black) MX-238XT Toner cartridge x1 10K
Life setting by A4 6% document
and Toner save mode
3 Developer MX-312FV Developer x1
20cpm/23cpm : 75K
26cpm/31cpm : 100K
4 Drum MX-312FR Drum x1
20cpm/23cpm : 75K
26cpm/31cpm : 100K
No. Name Product name Content Life Remark
1 Heat roller MX-312UH Upper heat roller x1 150K
2 Toner filter MX-312TF Toner filter x1 75K
No. Item Content Life Model name Remarks
1 Upper heat roller kit Upper heat roller x 1 150K MX-313UH
Fuser gear x 1
Upper heat roller bearing x 2
Upper cleaning pad x 1
Fusing separation pawl (upper) x 4
2 Lower heat roller kit Lower heat roller x 1 300K MX-312LH
Fusing separation pawl (lower) x 1
Fuser bearing (lower) x 2
3 Maintenance kit Drum separation pawl unit x 2 100K MX-312KA
Cleaner blade x 1
MC unit x 1
4 Drum frame unit Drum frame unit x 1 300K MX-312DU The life of the toner reception seat
attached to the drum frame is
300K, and it can be used up to 3
times.
(Supplied as a drum frame unit.)
5 Transfer roller unit Transfer roller unit x 1 150K MX-312TX
6 Paper feed roller kit Paper feed roller kit x 1 100K MX-312RT
7 Paper feed roller kit Paper feed roller kit x 1 100K MX-312MR
8 Fusing unit Fusing unit (120V heater lamp) x 1 150K MX-312FU1
9 Fusing unit Fusing unit (200V heater lamp) x 1 150K MX-312FU
10 Toner filter unit Toner filter unit x 1 100K MX-312TF
(UMIDITY
4EMPERATURE
5SEENVI
RONMENT
CONDITIONS
Standard environmental
conditions
Temperature 20 - 25 degrees C
Humidity 65 +/- 5%RH
Usage environmental
conditions
Temperature 10 - 35 degrees C
Humidity 20 - 85%RH