AR-6020V DISASSEMBLY AND ASSEMBLY 10 – 11
4) Remove the operation panel PWB.
F. Optical frame unit section
(1) Optical frame unit
1) Remove the right cover and the left cover.
2) Remove the screws at the left side of the optical frame.
3) Remove the screws at the right side of the optical frame.
4) Remove the FCCs and the harness from the optical unit to the
MCU PWB. Then, remove the optical frame unit.
G. LSU section
(1) LSU unit
1) Open the front cover.
2) Remove the screws fixing the paper exit tray.
3) Open the tray and remove the left cover.
No. Contents
1 Optical frame unit
No. Contents
1LSU unit
To Next Page
Loading...
